Chemical composition of material of nuts
Chemical composition of material of nuts
Nuts must be made from a steel chemical composition see the following table, which determines the minimum and maximum content of major chemical elements.
Table according to standard ISO 898 (applies to nuts produced by forming)
| Strength class | Limit figures of the chemical composition | ||||
|---|---|---|---|---|---|
| C Max. | Mn Min. | P Max. | S Max. | ||
| 41), 51), 61) | - | 0,50 | - | 0,060 | 0,150 |
| 8, 9 | 041) | 0,58 | 0,25 | 0,060 | 0,150 |
| 102) | 052) | 0,58 | 0,30 | 0,048 | 0,058 |
| 122) | - | 0,58 | 0,45 | 0,048 | 0,058 |
- If the nuts are made of free-cutting steel (rarely can be made of other steels, depending on the agreement between the customer and supplier), the following maximum allowable rates, P, Pb: S = 0.34%, P = 0, 12%, Pb = 0.35%
- The strength of these classes can be added alloying elements in order to achieve the desired mechanical properties.
Table according to standatd DIN 267 (valid for nuts produced by automat steel)
| Strength class | Limit figures of the chemical composition | |||
|---|---|---|---|---|
| C Max. | P Max. | Pb Max. | S Max. | |
| 5 AU, 6AU | 0,50 | 0,12 | 0,35 | 0,34 |
Hexagonal nuts according to standartds DIN 555, DIN 934 and DIN 935 Nutscrown made machining automat steel are marked circular groove on one side of the matrix.
© 2024, KILLICH s.r.o. – všechna práva vyhrazena
Private policy | Terms of use | Privacy Policy | Sitemap
Created by eBRÁNA s.r.o. | Powered by CMS WebArchitect | SEO a internetový marketing